CARA SETTING PABX HT SERIES


Cara Setting Manual PABX Panasonic HT Series (TA, TEB, TES, TEM)

Dari telephone key (untuk program) berada di Jack 01 dan berisi kabel 4P: [Program] [*] [#] [password] // default password 1234 [sys pgm mode]:

Set Denied Code
[302] [sp-phone][sp-phone] isi: 00 [store] [hold]
[303] [sp-phone][sp-phone] isi: 0 [store] [hold]
[304] [sp-phone][sp-phone] isi: 0 [store] [hold]
[305] [sp-phone][sp-phone] isi: [pause] [store] [hold]

Set TONE
[401] [sp-phone][sp-phone] pilih: [auto-ans] [auto-ans] (tampilan dilayar DTMF) [store] [hold]

Set Day IN Ring
[408] [sp-phone] [*] [#] [*] pilih: [auto-ans] (sampai tampilan dilayar DISABLE) [store] [hold]
[409] [sp-phone] [*] [#] [*] pilih: [auto-ans] (sampai tampilan dilayar DISABLE) [store] [hold]
[410] [sp-phone] [*] [#] [*] pilih: [auto-ans] (sampai tampilan dilayar DISABLE) [store] [hold]

Untuk Ring defaultnya secara Mixed di bunyikan semua.

Set Class Of Restricted
[601] [sp-phone] [*] isi: [5] [store] [hold]
[602] [sp-phone] [*] isi: [5] [store] [hold]
[603] [sp-phone] [*] isi: [5] [store] [hold]

COS 5= Indikasi bahwa semua extension tidak bsa di gunakan untuk telpon keluar.

Selesai untuk persiapan pemrograman, boleh juga ditambah settingan program waktu di program [000]

PABX HT Series, TEB, TES, TEM, termasuk type TA, mempunyai persamaan dalam setting untuk timer.

Timer pada PABX type ini, yang disetting adalah extensionnya. Maksudnya, hanya extension yang bisa diberi timer, tidak seperti type pabx lain, bisa COS (class of service) yang diberi timer.

Jika extension sudah diberi timer, maka 15 detik sebelum putus akan diberi peringatan berupa tone yang akan terdengar setiap 5 detik sekali, jika timernya sudah sampai, maka percakapan akan diputus otomatis.

Cara settingnya:

  1. Masuk ke menu program dari key telephone extension manager, default ada di jack #01:
    [Program] [*#][Password]
  2. Masuk ke menu program [212]:
    Pilihan waktu dari timer ini adalah dari 1 menit sampai 32 menit. Pilihan timer ini berlaku sama untuk semua line CO yang ada, tidak bisa dibeda-bedakan misalnya; CO1 timer 3 menit, CO2 timer 5 menit dan sebagainya.
  3. Jika sudah di isi nilai timernya, lakukan penyimpanan dengan menekan tombol [store]
  4. Tekan tombol [hold]
  5. Masuk ke menu program [613]:
    Pada program ini kita akan memilih jack extension yang akan diberi timer. Defaultnya jack #01 = ext 101, jack #02 = ext 102, jack #03 = ext 103 dan seterusnya.
    Jika ragu ada nomer extension yang sudah berubah dari standarnya, bisa di check di program [009].
    Extension yang akan diberi timer, optionnya di bikin [Enable].
    Dan simpan dengan menekan tombol [store].

DATA PROGRAM  :

KX-TA 308 / 616 / 624

PROG + *# Password ( Default 1234 )

 

000 Data and time setting

001 System speed dialing enry

002 System password

003 DSS Console port assignment

004 Paired telephone assignment for DSS CONSOLE

005 One touch transfer using a DSS BUTTON

006 Time service ( Day / Night / Lunch ) changing mode

007 Time service start time

008 Operator assigment

009 Extension number assignment

 

 

100 Hunting group set

101 Hunting type

102 Voice mail port

103 DTFM Integration

104 Hold mode selection

105 Conference tone

106 External paging acces tone

107 DTMF Receiver check

108 Flash mode for a station locked extention

109 CO Indictor assignment

110 Flash key mode

111 Hold music selection

112 DSS Console indication mode

113 Automatic redial reapet

114 Automatic redial interval time

115 extention ringing pattern selection

116 Conference pattern selection

117 Call pickup tone

118 Pulse restriction

119 Redialing after pulse to tone conversion

120 Bell frequency

121 Automatic outside co line acces number

122 Automatic rotation for CO LINE

123 Break ratio

124 SLT ringing mode selection

125 Tool restriction check for * and #

 

200 Hold recall time

201 Transfer recall time

202 Call forwarding start time

203 Pickup dial delay time

204 Call duration count start time

205 Outside to outside ( CO to CO ) line duration time limit

206 Dialing start time

207 Hook switch flash timing range selection

208 Inter digit time

211 No dial disconection

212 CO Line duration time limit

213 Bell off detection

 

300 Carrier code detection

301 Toll restriction – SSD

302 – 305 Toll restriction class 2 trought 5 denied codes

306 Toll restriction – exeption codes

309 Toll emergency dial number set

310 Account codes

311 Automatic pause insertion codes

312 Toll restriction – station lock bondry class

 

400 CO Line conection

401 Dial mode

402 Pulse speed selection

403 Host PBX acces codes

404 Outside ( co ) line group assignment

405 – 407 Flexible outward dialing assignment – D / N / L

408 – 410 Flexible ringing assignment – D / N / L

411 – 413 Delayed ringing assignment – D / N / L

414 – 416 Outside ( CO ) line mode – D / N / L

417 Pause time

418 Flash time

419 Automatic designated outside ( CO ) line acces

420 Calling party control ( CPC ) signal

421 CPC detection for outgoing calls

422 Disconection time

423 Outside ( CO ) line ringing pattern select

424 Reverse ( polarity ) circuit assignment

 

500 DISA incoming dialing mode selection

501 DISA built in Auto attendant

502 OGM Mode selection

503 FAX Conection

504 DISA Delayed answer time

505 DISA Waiting time after OGM

506 DISA Busy mode

507 DISA Intercept mode

508 DISA ringing time before intercept

509 DISA ringing time after intercept

510 DISA No dial mode

511 DISA Security type

512 DISA Security codes

513 Cyclic tone detection

514 Fax tone detection

515 Intercept time for for internal DISA

516 DISA incoming assignment

517 DISA AA wait time

518 DISA Tone selection after the security codes

519 DISA OGM Mute time

520 UCD Group

521 UCD Busy waiting time

522 UCD OGM Message internal time

523 UCD Busy mode

524 UCD Intercept mode

525 UCD ringing time before intercept

526 UCD ringing time after intercpt

 

600 Extension group assignment

601 – 603 TRS – COS ( Class Of Service ) Assignment

604 Ext name setting

605 Account codes entry mode

606 Call transfer to an outside ( CO ) line

607 Call forwarding to an outside ( CO ) line

608 Executive busy overide

609 DND Overide

610 Pararelled telf conection

611 TAM ( Telp Answering Machine ) Ext

612 Room monitoring assignment

613 Outside ( CO ) line detection time limit selection

614 Internal pulse detection

615 LCD Language

 

700 – 702 Doorphone ringing assignment

703 – 705 Door opener assignment

706 Doorphone ringing / tone pattern selection

707 Doorphone acces tone selection

708 Doorphone ringing assignment

709 Door opener time

 

800 SMDR RS – 232 C Com parameter

801 SMDR Parameter

802 Incoming / outgoing call selection for printing

803 Secret speed dialing / one touch dialing printing

805 SMDR Account code selection

806 SMDR Language assignment

 

999 System data clear

 

INITIAL SET

1. Slide the system clear switch to the “ CLEAR “ position

2. Press the “ RESET “ button

3. Return the system “ CLEAR “ switch to the “ NORMAL “ position

before the power indicator stop flashing.

( The power indicator will flash for about 10 second )

 

Cara Setting OGM / DISA pada PABX Panasonic HT Series

Cara settingnya:

  1. Masuk Program
  2. Kemudian dari telepon operator lakukan perekaman (note: standar telepon operator itu di jack 01):
    Cara merekamnya:
    [program] [9] [1] [nomer ogm dari 1-8][Jika terdengan nada tuut langsung rekam greeting] [Store]
    note:  [program][9][1] itu untuk merekam ogm. [1-8] itu untuk posisi rekaman.
    Jadi kalau mau merekam di ogm 1 maka:
    [program] [9] [1][1] [rekam][Store]
    Cara memutar ulang:
    [program] [9] [2][nomer ogm]
  3. Masuk ke program system:
    [program] [*#] [password] ->
    Masuk ke program setting dering:
    [408] [sp-phone] [*] [#] [*] pilih: [auto-ans] (sampai tampilan dilayar DISABLE) [store] [hold]
    ini untuk mematikan dering pada line, lakukan setting yang sama untuk mode malam dan lunch di [409-410]
  4. Kemudian pindah ke program [414-416]
    [414] [sp-phone] [*] pilih: [auto-ans] (sampai tampilan dilayar DISA) [DISA OGM no 1][store] [hold]
    ulangi langkah diatas untuk mode malam dan lunch [415-416]
    note: pada pilihan disa ogm, pilih nomer sesuai nomer rekaman kita tadi.

Yang diatas itu untuk settingan tanpa Auto Attendant, artinya kalau penelepon tidak menekan nomer tertentu, atau nomer yang ditekan salah maka akan kembali ke operator secara defaultnya.

Tapi jika kita menggunakan auto attendant, misal tekan 0 untuk operator, tekan 1 untuk bagian anu, tekan 2 untuk bagian anuanu maka settingan ditambah pada mode program:
[500] [sp-phone][auto-ans: pilih With AA] [store] [hold]

kemudian pada program [501] untuk pilihan setting 0-1-2-dst diarahkan ke extension mana:
[501] [sp-phone] [No Auto Attendant : 0-9] [auto-ans: pilihan jack/grup/3level AA/ not store] pilih jack tempat extension yang dituju.[store] [hold].
note: pilihan jack dari jack 01 – 24, grup dari grup 1-8.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s